I recently picked up a "shed fresh" '77 Yamaha XS 750 from the original owner. My target is to unveil it at the 2015 Toronto Mods and Rockers. Want it?
Wednesday, 20 August 2014
2 into 1 intake using modified stock carb
Paint and Polish
Fabbed up a custom battery box for the Ballistic 8 cell battery and fit it where the center stand used to be!
Fabbed a one off 2 into 1 exhaust and finished it using a Cone Engineering slip-on
Chopped stock fender and DIY Solid Peg Rearsets
Custom fabbed rear subframe built to fit the profile of a Moto Lana Seat. It also holds the electrics and built in brake, running and LED signals.
Gloss, semi-gloss and high heat powder coat from Brightside
Custom billet upper triple clamp available from Bullit Custom Cycles and the assembly starts!!!
XV535 rear hub machine to fit the 750 Virago. Thanks Knifemaker!!!
Modified a replica Benelli Mojave tank by adding stock Virago gas cap and tunnel. By doing this the tank sits lower not showing the frame giving a cleaner look and uses the stock location that helps hide the wiring.
Paint Werx in Shelburne did their usual thing. Perfection!!!
Headlight with integrated LED signals
Delivered to the client at the Toronto Mods and Rockers kick off BBQ held at Town Moto!